Removing paint from brick not only helps refresh the overall look of your home, but also allows your brickwork to breathe again. This means the bricks themselves will have an extended lifespan and require less maintenance in the long run.
Like painting a wall, removing flakey paintwork from interior brickwork will also help to improve your home’s interiors. It could perhaps help you uncover some beautiful period bricks, too.
Can You Remove Paint From Brick?
Yes, removing paint from brick is possible, but there are a few things you need to take into consideration first.
For starters, you must consider the condition of the existing brickwork and the original paint used. If you have older brickwork, sandblasting or similar will likely damage the bricks, but this is a less common problem with newer brickwork.
Sandblasting is really only a choice for outdoor brickwork, though, as it will make a lot of mess. For smaller/indoor surfaces, a more subtle solution is needed, such as a paint stripper and a selection of basic tools.
It is also worth considering the types of brick used in the build of your home, which will affect how vigorously you approach the paint removal process.
Finally, do check what paint has been used beforehand, too, e.g., lead paint, as this can help determine what’s needed to best remove the paint.
What If the Paint Has Damaged the Brickwork?
Paint won’t damage your brickwork, but it may block the porous nature of brick, which can lead to it retaining moisture. If this happens, the brick will start to degrade and cause the paint to flake.
Here, you have two choices: remove the paint and leave the brick in its natural state, or be prepared to repaint the brick on a regular basis, ideally using one of the best masonry paints you can find.
Ideally it’s best left in its natural state. This commonly applies to exterior brickwork rather than interior brick.
Can You Remove Paint From a Brick Fireplace?
The same principles apply when it comes to removing paint from a brick fireplace or other interior brickwork.
Assess the brickwork and the paint used. Is the brickwork in good or poor condition? If covered in soot, clean off first.
How many layers of paint are there? How long has the paint been on the fireplace? The most common approach would be to apply a gel paint stripper with a disposable brush and remove with a scraper.
To finish, use a wire brush to remove any leftover paint. Then, use a small wire brush to clean the mortar. Repeat the process on any stubborn areas.
